mercoledì 17 dicembre 2014

Frame with angel

A simple tutorial for dollhouses in 1 inch scale. Happy Holydays :)

Frame with angel for dollhouse
Frame with angel for Dollhouses

You will need
  • Flat wooden sticks 4 mm wide, two 5 cm long and two 4 cm long
  • white air-drying clay
  • white acrylic paint
  • mosquito net
  • grey ink
  • a little sponge
  • item you like (I've used an angel)
  • two part silicone mold putty
  • paint brush
  • white glue
  • cyanoacrylate glue

    Steps for a frame with angel for dollhouses
    The steps of the tutorial

  1. Cut the ends of the wooden sticks at 45° and a rectangle of 3,8 x 4,8 cm (= 1.5 x 1.9 in) from the mosquito net.
  2. Push the item you would duplicate in the silicone gum. When you have the mould, put a little amount of air-drying clay inside it and wait until th eitem is completely dry.
  3. Glue the wooden sticks with the white glue to have a rectangular frame and then paint it whit the white acrylic paint .
  4. When the paint is dry, take a little amount of grey ink with the sponge and rub the frame. Let dry.
  5. Glue the net on the back of the frame with the cyanoacrylate glue.
  6. Glue the replica in the centre of the net with the white glue.
Another decoration for the frame in 1/12 scale
Another kind of decoration for the frame

Have fun! :)

Only for personal use, commercial use is not allowed.